Skip to content
zoroprint
Atsisiųsti

DTF transfers that crack or feel thick: total ink limit and black generation

A DTF transfer is a plastic film of ink and adhesive. Put too much ink in one place and that film gets thick, stiff and — after ten washes — cracked. The printer will happily put 400 % ink on a pixel unless the RIP stops it.

5 min. skaitymo · Atnaujinta 2026-09-21
Trumpai
  1. Set the total ink limit to 250–280 % for converted Epsons
  2. Set GCR (black generation) to 60–80 % so dark colours use black, not CMY on top of each other
  3. Lower per-channel limits (C/M 80 %, Y/K 70 %) if the film still puddles

Total ink limit (TIL)

A dark brown is cyan + magenta + yellow + black. Without a limit that pixel gets up to 400 % ink coverage plus 100 % white underneath — five layers of wet ink that never fully dry before the powder. The TIL caps the sum. On DTF film 250–280 % is the range; ZoroPrint defaults to 280.

GCR / black generation

Grey component replacement swaps the part of a colour that is “grey” (equal C, M and Y) for black ink. Higher GCR means less total ink for the same colour, sharper dark detail and a thinner film. 60 % is a safe default; 80 % for designs with a lot of dark shading.

Per-channel limits

Each ink has a point where more drops do not make the colour darker, they only make it wetter. The BlackBox-style defaults (C 80, M 80, Y 70, K 70 %) come from that point on typical DTF inks. If a solid colour looks puddled or bleeds into its neighbour, lower that channel by 10 %.

Symptoms → settings

  • Cracks along dark areas after washing: TIL too high → 250 %.
  • Transfer feels like a rubber patch: TIL and white density both high → 260 % and 80 % white.
  • Dark colours look glossy and smear on the film: per-channel limits → −10 %.
  • Dark colours look flat and greyish: GCR too high → 40–50 %.

Įstrigai kitur? Klausk — ZoroPrint komanda atsako į kiekvieną klausimą.

Užduoti klausimą

Nauji DTF gidai tavo el. pašte

Maždaug vienas el. laiškas per mėnesį: nauji gidai ir vaizdo įrašai, sprendimai problemoms, apie kurias klausia žmonės, ir ZoroPrint naujienos.

Maždaug vienas el. laiškas per mėnesį su naujais DTF gidais, vaizdo įrašais ir ZoroPrint naujienomis. Pirmiausia el. paštu atsiųsime patvirtinimo nuorodą, o prenumeratos atsisakyti galėsi bet kada. Privatumo politika

Spausdink teisingai su ZoroPrint

Nemokamai vienam spausdintuvui. Kanalų testas, preflight ir baltas pagrindas iš šių gidų jau įdiegti.

Daugiau gidų