요약
- Set per-channel ink limits before anything else
- Load a profile made for your ink + film (or the L805 / L1800 profile from your kit)
- Convert colour exactly once — in the RIP, never also in Photoshop
Ink limits first
Film cannot take 400 % ink. Before any profile, cap each channel (C 80, M 80, Y 70, K 70 is the BlackBox default for the L805) and the total (220–280 %). Too much ink pools, cures slowly and cracks; too little looks washed out.
Which profile
- The best profile is made for your exact ink, film, resolution and press temperature, from a printed target measured with an i1Pro or ColorMunki.
- Second best: the profile that came with your kit or your previous RIP (for example the L1800-L805-L800 profile many BlackBox users have). ZoroPrint imports .icc and .icm files, v2 and v4.
- No profile at all still works — the built-in separation is sane — but you will hand-tune saturation.
Rendering intent
- Perceptual for photos: keeps tonal relationships, compresses the gamut gently.
- Relative colorimetric for logos and flat colours: exact where the ink can reach, clipped where it cannot.
The rule that breaks colour
Convert once. If Photoshop already converted the file to a printer profile and the RIP converts it again, you get double correction: greys go blue, skin goes green. Keep files in sRGB (or AdobeRGB with the embedded profile) and let the RIP do the single conversion.
다른 문제로 막혔나요? 물어보세요 — ZoroPrint 팀이 모든 질문에 답해요.
질문하기새 DTF 가이드를 이메일로 받아 보세요
한 달에 이메일 한 통 정도: 새 가이드와 영상, 많이들 묻는 문제의 해결법, ZoroPrint 소식을 보내 드려요.
