Skip to content
zoroprint
Muat turun

DTF heat press settings: temperature, time, pressure — and hot vs cold peel

A DTF transfer is finished in the press, not in the printer. Most “the print washed out” or “the edges lift” complaints are press settings, and the film you bought decides half of them.

6 min bacaan · Dikemas kini 2026-09-21
Ringkasnya
  1. Cure the powder fully (it must look like an orange-peel gel, not sugar)
  2. Press 15 s at 150–160 °C, medium pressure
  3. Peel according to the film type, then re-press 5–10 s with parchment

Starting point

  • Temperature 150–160 °C (300–320 °F). Polyester and blends at the low end, heavy cotton at the top.
  • Time 12–15 s for the first press, 5–10 s for the second press after peeling.
  • Pressure medium — about 3–4 bar on a pneumatic press, or “firm hand, not body weight” on a clamshell.
  • Always pre-press the garment 3–5 s to remove moisture and flatten seams.

Hot, warm or cold peel

The film manufacturer decides. Hot peel films release the moment the press opens; cold peel films need 20–40 s and will tear the design if you rush. Warm peel is the forgiving middle. If you do not know, peel one corner after 10 s: if the adhesive stretches like chewing gum, wait longer.

Second press

After peeling, cover with parchment or a Teflon sheet and press 5–10 s. This pushes the adhesive into the fibres, kills the plastic shine and is the single biggest factor in wash durability. For a matte finish use parchment; for a slight sheen use Teflon.

Per fabric

  • Cotton: standard settings.
  • Polyester sportswear: 140–150 °C, 10–12 s, to avoid dye migration and scorch marks. Test on a hidden area.
  • Nylon / softshell: 130–140 °C, light pressure, longer second press; some nylons need a low-temperature film.
  • Thick hoodies: raise pressure or use a pressing pillow so the seams do not lift the platen.

Buntu tentang perkara lain? Tanya — pasukan ZoroPrint menjawab setiap soalan.

Tanya soalan

Panduan DTF baharu terus ke peti masuk anda

Kira-kira satu e-mel sebulan: panduan dan video baharu, penyelesaian kepada masalah yang orang tanyakan, dan berita ZoroPrint.

Kira-kira satu e-mel sebulan dengan panduan DTF baharu, video dan berita ZoroPrint. Kami akan menghantar pautan pengesahan ke e-mel anda terlebih dahulu, dan anda boleh berhenti melanggan pada bila-bila masa. Dasar privasi

Cetak dengan betul bersama ZoroPrint

Percuma untuk satu pencetak. Ujian saluran, preflight dan lapisan asas putih daripada panduan ini sudah terbina di dalamnya.

Lagi panduan